Electrical System - Canon NP6412 Service Manual

E.

Electrical System

1. Removing the DC Controller PCB
1) Open the machine's top unit.
2) Remove the screw [1], and detach the
front upper cover [2].
Caution:
The flexible cable for the control panel is
connected to the upper front cover; dis-
connect the cable from the DC controller
PCB.
3) Disconnect all connectors from the DC
controller PCB, remove the screw [3], and
free the five claws [4]; then, detach the
DC controller PCB [5].
COPYRIGHT © 1999 CANON INC.
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[2]
[1]
Figure 7-326
[3]
[4]
[4]
Figure 7-327
[5]
[4]
7-21