Chapter 5
5.3.9 E540
Code
Detail
E540
8001
8002
8003
8004
8005
8006
8007
5-8
T-5-12
Error Description
Tray 1 shift
motor(M107)/
Tray 1 shift area
sensor PCB
Detection timing
If the tray does not return to home position when
the tray 1 shift motor is driven for 20 seconds.
If the tray does not move to other area when tray
1 shift motor is driven for 4 seconds.
- The dangerous area is reached before the tray 1
paper surface sensor detects paper surface
during the paper surface detection operation.- A
discontinuous area is detected during tray
operation.
- The tray 1 closing detect switch is activated
while the tray 1 is operating.
- Clock signal input cannot be detected when the
tray 1 shift motor has been driven for 0.2 second.
- The lock detection signal turns OFF 150 ms
after the lock detection signal turned ON.
- The lock detection signal does not turn ON
when the tray 1 shift motor has been driven for 1
second.
- The lock detection signal does not turn OFF
when the tray 1 shift motor is at a stop.
0009-2689