3.2 Drive System
3.2.1 Stapler
3.2.1.1
Removing the
Front Door
Refer to Procedure 3.1.5
3.2.1.2
Removing the
Escape Tray Cover
Refer to Procedure 3.1.6
3.2.1.3
Removing the
Front Inside Upper
Cover
Refer to Procedure 3.1.4
3.2.1.4
Removing the
Stapler
1) Pull out the stapler, remove screw [1],
and remove the PCB cover [2].
0009-4493
0009-4414
2) Release the claw [1] and remove the
PCB [2].
3) Disconnect three connectors [3].
0009-4494
4) Remove screw [4] and remove the
stapler together with the stapler base [5].
0009-3631
damage the flag [6].
[2]
F-3-9
When removing, be careful not to
Chapter 3
[1]
3-5