Stack Delivery Operation - Canon Finisher-T1 Service Manual

Chapter 2

2.3.5 Stack Delivery Operation

0009-2517
The stack is ejected each time three large size sheets*1 or five small size sheets*2 are offset
on the processing tray.
The swing motor turns and the swing guide descends. This causes the upper/lower stack
delivery rollers to hold the stack. The stack delivery motor turns the stack delivery roller
and return roller. At the same time, the rear end assist guide is started by the rear end assist
motor and the stack held by the stack delivery rollers is delivered in the ejection direction.
The rear end assist guide stops once it reaches the prescribed position and returns to home
position when the rear end assist motor is reversed. Then the stack delivery motor starts and
ejects the stack with the upper/lower stack delivery rollers.
Swing guide
Stack ejection rooler
Return roller
Rear end assist guide
F-2-20
*1 Varies from 1 to 4 sheets depending on the number of original. (ex: When the number of
original is 10, copy stack are ejected in the order of 3 sheets, 3 sheets and 4 sheets.) In case
for the thick paper, copy stack always consists of 2 sheets.
*2 Varies from 1 to 6 sheets depending on the number of original. (ex: When the number of
original is 7, copy stack are ejected in the order of 5 sheets and 2 sheets.)
2-17