External Covers; Tray Guide Top Cover; Removing The Rear Cover Of The Tray; Document Feeding System - Canon Additional Finisher Tray-C1 Service Manual

Finisher, sorter, deliverytray
Hide thumbs Also See for Additional Finisher Tray-C1:
Table of Contents

Advertisement

Chapter 3
[4]
When removing the tray unit, be careful not to get your hands hit or pinched.
Do not hold the tray.

3.2 External Covers

3.2.1 Tray Guide Top Cover

3.2.1.1 Removing the Rear Cover of the Tray

1) Remove the two RS tightening screws (M3 x 8) [1], and then detach the
rear cover [2] of the tray.
[1]
[2]
F-3-8

3.3 Document Feeding System

3.3.1 Stack Tray Assembly

3.3.1.1 Removing the Stack Tray Assembly Harness

1) Remove the screw [1], and then remove the sensor mounting plate [2].
2) Remove the harness from the two wire saddles [3], and then remove the
reusable band [4].
3-2
[3]
F-3-7
3.3.1.2 Removing the Rear Cover of the Tray
1) Remove the two RS tightening screws (M3 x 8) [1], and then detach the
rear cover [2] of the tray.
[1]
0010-6797
F-3-10

3.3.1.3 Removing the Stack Tray Assembly

1) Holding the stack tray [1], remove it in the direction of the arrow.
0010-6798

3.4 Electrical System

3.4.1 Stack Tray Paper Surface Sensor

3.4.1.1 Removing the Stack Tray Assembly Harness
1) Remove the screw [1], and then remove the sensor mounting plate [2].
2) Remove the harness from the two wire saddles [3], and then remove the
reusable band [4].
[4]
[3]
[2]
F-3-9
[2]
[1]
F-3-11
[1]
0010-6799
0010-6800
0010-7682

Advertisement

Table of Contents
loading

Table of Contents