Canon Finisher-T1 Service Manual page 70

Chapter 3
3.3.2.5 Removing the
Tray 1
When moving the tray down to attach
it, you need to push the tray lift motor
gear [1] to the front (using a screwdriver
or the like) to release the clutch.
However, when the clutch is released,
the tray [2] drops by its own weight. Be
sure to hold the tray with your hand
when releasing the clutch.
[1]
F-3-21
1) Remove the screw [1] and remove the
stopper [2] at the front.
3-12
0009-3577
2) Remove the screw [1] and remove the
stopper [2] at the back.
[1]
[2]
3) Remove two screws [1], open three
harness retainers [2], and disconnect two
connectors [3].
[2]
F-3-22
F-3-23
[1]
[2]