Electrical System; Fan; Removing The Rear Cover; Removing The Cooling Fan - Canon DADF-M1 Service Manual

3.5 Electrical System

3.5.1 Fan

3.5.1.1 Removing the Rear
Cover
1) Open the feeder cover [1] and the original pickup
tray [2]; then, remove the 4 screws [3], and detach the
rear cover [4].
[2]
F-3-135
3.5.1.2 Removing the Cooling

Fan

1) Remove the screw [1], and disconnect the
connector [2]; then, detach the cooling fan [3].
[2]
F-3-136
0004-0741
[1]
[3]
[4]
0003-7155
[1]
[3]

3.5.2 Document Width Volume

3.5.2.1 Removing the Inside
Cover
1) Open the feeder cover, and remove the 2 screws [1];
then, detach the inside cover [2].
F-3-137
3.5.2.2 Removing the Original
Width Volume
1) Shift up the original pickup tray, and remove the 3
screws [1]; then, detach the original pickup tray cover
[2].
[2]
F-3-138
2) Disconnect the 3 connectors [1], and remove the 2
screws [2]; then, detach the original width volume [3],
Chapter 3
0004-0489
[1]
[2]
0004-0490
[1]
3-35