Electrical System; Deck Driver Pcb; Removing The Rear Cover; Removing The Deck Driver Pcb - Canon Paper Deck-V1 Service Manual

Chapter 3

3.5 Electrical System

3.5.1 Deck Driver PCB

3.5.1.1 Removing the Rear
Cover
1) Detach the deck from its host machine; then,
remove the 6 screws [1], and detach the rear cover [2].
[1]
[2]
[1]
F-3-85
3.5.1.2 Removing the Deck
Driver PCB
1) Disconnect the 9 connectors [1], and remove the 4
screws [2]; then, detach the deck driver PCB [3].
[3] [3]
[2] [2]
F-3-86
3-24
0009-2141
[1]
0009-2142
[2] [2]
[1] [1]
[2] [2]

3.5.2 Open Switch PCB

3.5.2.1 Opening
Compartment
1) Push the deck release grip to detach the deck from
its host machine. Then, push down the latch plate
[1] found at the rear left to open the compartment
[2].
[1]
(rear)
F-3-87
3.5.2.2 Removing the Front
Upper Cover
1) Remove the 3 screws [1], and disconnect the
connector [2]; then, detach the front upper cover [3].
F-3-88
3.5.2.3 Removing the Open
Switch PCB
1) Remove the 2 screws [2] from inside the front
upper cover [1]; then, detach the open switch PCB
[3].
the
0009-2143
[2]
0009-2144
[2]
[3]
[1]
0009-2145