Retrofit Kit Canister System - Atmos E 341 Battery Operating Instructions Manual

The battery will be charged.
»
Attach to / remove from a standard rail
Prerequisite: The power supply and recharging unit is mounted.
Mounting
Attaching the device
1. Slide the device from above onto the wall and device support until it clicks into
place.
If the charging accessory is attached, the battery is charged automatically.
»
Removing the device
1. Press the release button
1

8.2 Retrofit kit canister system

You may change the canister system. The retrofit kits comprise the canister system as
well as the required support for the canister system. The retrofit kits for the single-use
canister systems also comprise the vacuum hose.
Retrofitting
1. Remove the existing canister system, chapter „3.4 Connection and removal of
canister system and hoses" on page 18.
2. Remove the existing support for the canister system.
3. Attach the new support for the canister system.
4. Insert the new canister system.
Removal
and pull the device simultaneously vertically upwards.
1
Accessories
51