Accessories; Wall And Device Support - Atmos E 341 Battery Operating Instructions Manual

8.0 Accessories

Accessories
Serres
Medi-Vac
DDS canister system 1 l, complete
Wall and device support for ATMOS
Retrofit kit DDS canister system
Retrofit kit Serres
Retrofit kit Medi-Vac

8.1 Wall and device support

Affix the power supply and recharging unit
Prerequisite: The velcro fastener
Damaged cable due to incorrect mounting.
1. Please ensure that the power supply and recharging unit are positioned with the
writing towards the wall or the standard rail. Otherwise the cable could be clamped.
2. Affix the parts
Wall mounting
 Only affix the power supply and recharging unit after you have marked the holes to
be drilled.
 Screws are not included in delivery.
1. Only use screws (max. 4 mm), which are suitable for the material of the wall.
2. Position the wall and device support at an easily accessible place.
3. Check whether the wall is smooth and vertical at the mounting position.
4. Hold the wall and device support to the mounting location and align it with a spirit
level.
5. Mark the holes to be drilled on the wall.
6. Drill the holes with a, the wall material and the chosen screws corresponding drill.
7. Mount the power supply and recharging unit to the wall and device support. The
power supply and recharging unit must not be connected to the mains supply.
8. Screw the wall and device support to the wall with suitable screws.
9. Connect the power supply and recharging unit to the mains supply.
10. Check whether the charging accessory is correctly attached by installing the device.
50 Accessories
outer canister 1 l
®
outer canister 1 l
®
canister system
®
canister system
®
and and fix the cable
2 3
2
3
1
emergency suction devices
®
is attached to the wall and device support.
1
with the velcro fastener
4
4
REF
312.0465.0
312.0473.0
318.1000.0
318.1250.0
318.1350.0
318.1450.0
318.1650.0
.
1