Serres - Atmos E 341 Battery Operating Instructions Manual

3. Attach the canister unlocking.
 The canister unlocking is at the same time the connection angle through which the
canister system is connected to the pump.

3.5.2 Serres

canister system
®
Removal
1. Remove the connection angle.
2. Push the support for the Serres
take it out of the guides.
Mounting
1. Attach the support for the Serres
the device. The bars at the support must be fitted to the two guides at the device.
2. Slide the support for the Serres
device. The inlet to the pump must be visible.
canister system backwards up to the middle and
®
canister system in the middle on the right side of
®
canister system forward until it is flush with the
®
Setting up and starting up
27