Device Base - Atmos E 341 Battery Operating Instructions Manual

3.7 Device base

Removal
Prerequisite:
The following parts are removed:
• Canister system
• Support for canister system
• Hose rewind
• Battery compartment cover
1. Put the device carefully on the front.
2. Remove the device base in the following order A - B - C - D:
Mounting
NOTICE
Incorrectly mounted device base.
Device moves during the operation.
• Attach the device base with particular care, according to the operating instructions.
Prerequisite:
The following parts are removed:
• Canister system
• Support for canister system
• Hose rewind
• Battery compartment cover
1. Put the device carefully on the front.
2. Take care that the indentations at the device base are fitted to the protruding edges
at the device.
3. Attach the device base in the following order D - C - B – A. The arrows show the
points at which the device and the device base have to engage with each other.
4. Firmly press on all sides again.
30 Setting up and starting up
A
D
B
C
D
B
C
A