Table of Contents
Advertisement
Heat development of the light source.
Risk of burns.
•
Temperature control of the instruments by the user, e.g., on the back of the hand.
•
Pay attention to the heat development of the light source.
•
Switch off the light source when not in use.
•
Never reach into the light source output.
Avoid improper use.
Risk of severe injury to your patient.
•
The product is only permitted for use by trained, specialist personnel under supervi-
sion.
•
The product may only be applied by medically trained staff.
Keep the device fully functional at all times.
Malfunctions could cause injury to you and your patients.
•
Prior to each use, check whether the device is damaged. Do not operate the device
if you notice any damage. In this case, clean and disinfect the device and send it to
ATMOS for repair.
•
Perform a function check at least once a week, and also at any other time if you have
any concerns with regard to the safety of the device.
•
Observe the specifications regarding periodic tests in chapter "7.1 Periodic tests" on
page 25.
•
Do not modify the device without the manufacturer's permission.
•
Only use original accessories and original spare parts from ATMOS.
•
Assembly, new settings, modifications, extensions, and repairs may only be carried
out by persons who are authorized by ATMOS.
2.3 Avoiding damage to the device
Storage and operation in an unsuitable environment.
Risk of damage to the product.
•
Please observe the ambient conditions regarding transport, storage, and operation.
Notes for your safety
11
Advertisement
Table of Contents
