Table of Contents
Advertisement
3.0 Setting up and starting up
3.2.3 Operating elements on the microscope
Freeze
Video record-
frame
ing (start/
stop)
3.2.4 Rear view of the control device of the ATMOS i View 21
Output for the power supply of
the electronics in the micro-
scope
3.2.5 Rear view of the control device of the ATMOS i View 31 (not with an integrated HD camera)
Output signal of
Output signals of
the "Video record-
the tilt sensor in the
ing" function
carrier arm system
USB port for transferring
the key status of the
"Freeze frame "and "Vid-
eo recording" functions
With integrated HD camera: Adjust-
ment of the camera's light mode
Connection for potential
equalization line acc. to IEC
60417-5021
S-video outputs of
the integrated SD
camera
Output signal of
Output for the triggering
the "Freeze frame "
signal from the ATMOS
function
Strobo 21 LED
Light on/off (inde-
pendent of automat-
ic light control)
IEC power plug with fuse
inlay for the connection to the
power supply
Connection for potential
equalization line acc. to
IEC 60417-5021
Connection for the
supply to the micro-
scope electronics and
control line
IEC power plug with fuse inlay
for the connection to the power
supply
Connection to the foot switch
for switching between the light
channels
11
Advertisement
Table of Contents
