Installation - NEC Express5800/T120h User Manual

Chapter 2 Preparations

Installation

Follow the steps below to install a DIMM.
See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
Open levers on left and right sides of DIMM slot.
Push the DIMM straight into the slot.
When a DIMM is inserted into the slot, the lever automatically closes.
Notch
Continue to install/remove the internal options.
See Chapter 2 (1.24 Installing Side Cover) to install the side cover.
See Chapter 2 (2 Installation and Connection) to install/connect and turn the power ON.
Confirm that no error messages are displayed in POST screen.
Use System Utility to configure memory mode.
Important
Make sure the orientation of the DIMM. The DIMM has a notch, preventing
being incorrectly inserted.
Do not apply too much pressure when you push a DIMM into the slot. Doing
so can damage the socket or terminal part.
Note In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Express5800/T120h User's Guide
1. Installing Internal Optional Devices
85