NEC Express5800/T120h User Manual page 55

Chapter 2 Preparations
4. Match the TPM kit with the connector grooves on the motherboard. Press the connector in firmly and install
the TPM kit. Please check the location of the TPM connector on the motherboard by looking at the quick
reference level attached to the back of the top cover.
5. Install the TPM cover
(1) Align the holes and locking latches on both sides of the TPM connector.
(2) Press down the center of the cover firm and straight until you hear a locking sound.
6. Re-attach the options and cables that were removed in step 3.
Note
Once installed, do not remove the TPM cover from the mother board. This may
cause the TPM cover, TPM, and the mother board to malfunction or to be
damaged.
Note also that the data stored in the TPM, including the key, will be deleted if the
TPM is removed and attached to another server and then energized.
Note
Use TPM under the designated condition. If you install TPM in a different condition,
TPM or the mother board may break or may be damaged.
Express5800/T120h User's Guide
1. Installing Internal Optional Devices
55