Nvme Drive Led - NEC Express5800/T120h User Manual

Chapter 1 General Description

NVMe drive LED

NVMe SSD is a PCIe bus device. Devices connected to the PCIe bus cannot be removed until the signals of
device and bus and traffic flow are completely terminated.
No.
1 Position Check LED
2 DISK ACT LED
3 DISK STATUS LED
4 Removal Prohibition LED
40
Important
Do not remove the NVMe drive from the drive bay if the removal-prohibiting
LED is blinking. The blinking of the removal-prohibiting LED indicates that
the device is still in use. Removing the NVMe drive before the device signals
and traffic flow are completely terminated may result in data loss.
Item Status
Lights in blue
Flashes in blue
Rotates in green
Lights off
Lights in green
Flashes in green
Flashes in
amber/green
Flashes amber
Lights in green
Lights off
Lights in white
Flashes in white
Lights off
Express5800/T120h User's Guide
4. Names and Functions of Parts
Description
The drive is identified by the host application
Drive carrier firmware is being updated or
requires an update
Drive is working
Drive is not working
The drive is a member of one or more logical
drives.
The drive is being rebuilt; or the drive is
transferring RAID, transferring stripe size,
increasing capacity, or increasing the logical
drive; or the drive is being erased.
The drive is a member of one or more logical
drives, and it is estimated that there is a
problem with the drive.
The drive is not configured, and it is estimated
that there is a problem with the drive.
There is a problem with the drive.
There is no organization in the drive by the
RAID controller.
Do not remove the drive.
Remove the drive once it is separate from the
PCIe bus.
The drive can be removed.
The drive has been removed.