NEC Express5800/T120h User Manual page 94

Chapter 2 Preparations
(c) Mounting on Box1 and Box2
1. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. Remove the blank covers of the Box 1 and 2 referring to "(1) 2.5-inch HDD cage" - "(a) Installing in the Box
1" and "(b) Installing in the Box 2".
3. Mount the 3.5-inch HDD cages on the Box1 and Box2 of the server and fix the four positions of each cage
with the screws attached to the cage.
4. With the power cable attached to the 3.5-inch HDD cage, connect the 3.5-inch HDD cage's power
connector and the motherboard's power connector for Box1 drive.
5. Connect the optional built-in SAS/SATA cable and the power cable.
For connecting SAS/SATA cable, see (d) Cable Route in this manual.
94
Power
connector
Power connector
for Box1,2 drive
Express5800/T120h User's Guide
1. Installing Internal Optional Devices