NEC Express5800/T120h User Manual page 190

Hide thumbs Also See for Express5800/T120h:
Table of Contents

Advertisement

Chapter 3 Setup
Category
Security
Set a password
Restrict
entering password
To
TXT(Trusted
Technology),
needed for tboot(Trusted
Boot), enabled
UPS Power
When
link
supplied with power from
UPS, always turn on the
power.
If it is turned off by using
POWER switch, leave it
OFF
supplies power.
Keep the power OFF even
when
power.
*1
The factory setting is that "the Boot Mode menu" is set as "UEFI" and "the x2APIC menu" is set as "Enabled".
190
Description
Set
your
Configuration
Configuration (RBSU) > Server Security -
Set Admin Password
boot
up
by
Set your password in System
Configuration > BIOS/Platform
Configuration (RBSU) > Server Security
using Set Power On Password
make
Intel(R)
Install optional TPM kit and set to Enabled
Execution
in System Configuration > BIOS/Platform
which
is
Configuration (RBSU) > Server Security -
Intel (R) TXT Support.
the
server
is
Set to Always Power On in System
Configuration > BIOS/Platform
Configuration (RBSU) > System Options
> Server Availability - Automatic
Power-On
Set to Restore Last Power State in
System Configuration > BIOS/Platform
even
when
UPS
Configuration (RBSU) > System Options
> Server Availability - Automatic
Power-On
Set to Always Power Off in System
UPS
supplies
Configuration
Configuration (RBSU) > System Options
>
Server
Power-On
Express5800/T120h User's Guide
To be changed
password
in
System
>
BIOS/Platform
>
BIOS/Platform
Availability
-
Automatic
2. System Utility
(4/4)
Remark
If you set your password,
you are prompted to enter
the password from the next
time
you
start
System
Utility
If you set your password,
you are prompted to enter
the password from the next
time you start the system
Do not disable TPM with
the TPM management
module after setting
Intel(R) TXT Support to
Enabled to start OS. You
may not be able to change
TPM Support and TXT
Support.
In that case, execute F7:
Load Defaults.
If you connect UPS via
RS232C, make console
redirection setting invalid
from System Utility (set to
Disabled in BIOS Serial
Console Port).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nec express5800 series

Table of Contents