Chapter 2 Preparations
Installing LTO device
Please prepare the following before installing the option.
Parts included in the option kit
T-15 hexalobular driver
Cable
To install the components, follow these steps.
1.
Install the shims on the both sides of LTO device, and secure them by tightening screws with the T-15
Hexalobular screwdriver.
To install the shim, check also the manual attached to LTO device.
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Express5800/T120h User's Guide
1. Installing Internal Optional Devices
111