Raid Controller (Pci Card Type-P); Installing Raid Controller - NEC Express5800/T120h User Manual

Chapter 2 Preparations
1.18

RAID Controller (PCI Card Type-p)

This server supports RAID controller (PCI Card Type-p).
RAID controller N8103-195/196/201 are provided.
See the table for performance features.

Installing RAID controller

Please prepare the following before installing the option.
 Parts included in the option kit
 T-15 hexalobular driver
To install the components, follow these steps.
1. Back up all data in the server.
2. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3. Unfasten the bracket hand screws that secure the blank cover, and remove the brackets.
124
Important
The surface becomes hot after use so to avoid burns please allow the drive
and internal parts of the system to cool before touching.
Note In order to prevent the damage to electronic components, please start to install the
system after conducting the appropriate anti-static treatment. There is a possibility
of causing electrostatic discharge if appropriate grounding wire treatment is not
conducted.
Express5800/T120h User's Guide
1. Installing Internal Optional Devices