System Maintenance Switch - NEC Express5800/T120h User Manual

Chapter 1 General Description

System Maintenance Switch

Detailed features of system maintenance switch
Position Default
*1
SW1 OFF
*5
SW2 OFF
SW3 OFF
SW4 OFF
*2
SW5 OFF
*5
*3
SW6 OFF
*5
SW7 OFF
SW8 OFF
SW9 OFF
SW10 OFF
SW11 OFF
SW12 OFF
*1 Set SW1 to ON when all the passwords of iLO5 to which administrator authority is given have become
unknown, or when changing the feature of iLO5 from disabled to enabled.
*2 Regarding the operation procedure of SW5, see Chapter 1 (7.3.4 Clearing Passwords) in Maintenance
Guide.
*3 Regarding the operation procedure of SW6, see Chapter 1 (7.3.3 Restore the Default Settings of System
Configuration) in Maintenance Guide.
*4 Default values may be different from the factory presets.
*5 When you set SW1, SW5, and SW6 to ON at the same time, boot with the back-up ROM.
30
Setting
OFF Set to OFF usually.
ON Set the security of iLO5 to disabled.
Reserved
Reserved
Reserved
Set to OFF usually.
OFF
ON Clear power-on password and administrator password.
OFF Set to OFF usually.
ON Set the system configuration back to the default values. *4
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Important
Do not change the system maintenance switch that says "Reserved" unless
it is instructed by the document. It may cause the device to fail or
malfunction.
Express5800/T120h User's Guide
4. Names and Functions of Parts
Description
－
－
－
－
－
－
－
－
－