Glossary - NEC Express5800/T120h User Manual

Chapter 4 Appendix
2.

Glossary

Term
AHS
AMP
AMS
EXPRESSBUILDER
Express Report Service
Express Report Service (HTTPS)
Hexalobular
iLO
NEC ESMPRO ServerAgentService
NEC ESMPRO Manager
PC for Management
Product Info Collection Utility
RAID Report Service
RBSU
RESTful Interface Tool
SPP
Active Health System (AHS) monitors the status/configuration of the
server, and records it to a log file if any changes occur. AHS log is used
for maintenance to investigate the failure.
Advanced Memory Protection (AMP) is a technology for realizing a fault
tolerance of the server by memory redundancy (such as mirroring).
Agentless Management Service (AMS) is an OS service for sending
information (such as OS events) that iLO cannot collect directly. iLO
records the information received by AMS, and send it to Agentless
Management.
Software for setting up the server. EXPRESSBUILDER can be started
by pressing <F10> key during POST.
Software that can report the server failure to the contact center by
E-mail or modem. This software is installed with NEC ESMPRO
ServerAgentService to the server.
Software that can report the server failure to the contact center by
HTTPS. This software is installed with NEC ESMPRO
ServerAgentService to the server.
A type of screw head characterized by a 6-point star-shaped pattern.
This is often called as "Torx" (the Torx is a third party's trademark).
Head sizes are described from T1 to T100. This is sometimes
abbreviated as 6lobe.
A built-in controller that supports the IPMI version 2.0 protocol. The
controller is called as iLO5 because this server adopts a generation 5
version controller.
Software for monitoring the server. This works with NEC ESMPRO
Manager. You can choose Service Mode or Non-Service Mode when
installing this software. Service Mode resides as the OS service and
Non-Service Mode does not use the OS service to reduce memory,
CPU power, and other OS resources.
Software for managing a number of servers on network.
A computer for managing the server on network. A general
Windows/Linux computer can be used as "PC for Management".
Software for collecting several hardware/software statuses and event
logs. You can easily collect the data for the server maintenance by
using this software.
This service monitors the RAID status and notifies failures.
ROM-Based Setup Utility (RBSU) is a built-in utility that can configure
connected devices and BIOS settings. RBSU is called from System
Utilities.
A tool that supports API based on Representational State Transfer
(REST) architecture. You can send maintenance commands in JSON
format to iLO by HTTP protocol after installing this tool.
Standard Program Package (SPP) is a software package that includes
BIOS, FW, driver, and other basic software. SPP is included in Starter
Pack.
Express5800/T120h User's Guide
Description
2. Glossary
207