Chapter 2 Preparations
1.5
Removing Side Cover
Remove side cover when installing or removing the optional component or change internal cable connection.
Please have ready a hexalobular driver (T-15).
1.
See steps 1 to 5 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2.
Rotate the 4 stabilizers of the server and lay it sideways.
3.
Open the security screw on the side cover lever with a hexalobular screwdriver (①).
4.
Push the locking latch toward the back side (②), release the lock, and pull the lever (③).
Important
For safety reasons, please operate with the device laid on its side.
Express5800/T120h User's Guide
1. Installing Internal Optional Devices
51