Installing Rdx Device - NEC Express5800/T120h User Manual

Chapter 2 Preparations

Installing RDX device

Please prepare the following before installing the option.

Parts included in the option kit

T-15 hexalobular driver
To install the components, follow these steps.
1. Attach supplied screws in four points on both the left and right sides of RDX device, and tighten screws
with the T-15 hexalobular screwdriver.
108
Note In order to prevent the damage to electronic components, please start to install the
system after conducting the appropriate anti-static treatment. There is a possibility
of causing electrostatic discharge if appropriate grounding wire treatment is not
conducted.
Express5800/T120h User's Guide
1. Installing Internal Optional Devices