Hot Plug Compatible Sata/Sas Drive Led (2.5 Inch) - NEC Express5800/T120h User Manual

Chapter 1 General Description

Hot plug compatible SATA/SAS drive LED (2.5 inch)

No.
1 Position confirmation LED
2 DISK ACT LED
3 Removal-prohibiting
switch/LED
4 DISK STATUS LED
38
Item Status
Lights in blue
Flashes in blue
Rotates in green
Lights off
Lights in white
Lights off
Lights in green
Flashes in green
Flashes in
amber/green
Flashes in amber
Lights in amber
Lights off
Express5800/T120h User's Guide
4. Names and Functions of Parts
Description
The drive is identified by the host application
Drive carrier firmware is being updated or
requires an update
Drive is working
Drive is not working
Do not remove the drive. Removing a drive
will cause one or more logical drives to fail.
Removing the drive will not cause a failure to
occur in the logical drive.
The drive is a member of one or more logical
drives.
The drive is either being rebuilt, performing a
RAID level change, changing the strip size,
expanding the capacity, or the logical drive is
being expanded, or the drive is being erased.
A drive failure is predicted to occur because
the drive is a member of one or more logical
drives.
A drive failure is predicted to occur due to the
unconfigured drive.
A drive failure has occurred.
RAID controller configuration
performed in the drive.
is not