NEC Express5800/T120h User Manual page 185

Chapter 3 Setup
In case the setting has been changed, the following screen is displayed. To put the changed parameters
back to the original setting, select No - Discard Changes.
□ <F1> key
Displays help information. Press this key when you have any questions about the operation of System
Utility. Press <Esc> key to go back to the original screen.
□ <F7> key
Displays the following screen. To put the parameters of System Utility back to the default setting, select
Restore Defaults and Reboot. It acts in the same way as [Restore Default System Settings] in [System
Default Options] menu. For more details, refer to "Chapter 2 (1. System Utilities)" of "Maintenance Guide".
□ <F10> key
Displays the following screen. To save settings you set, select Yes.
iSCSI Configuration menu in Network Options menu cannot be put
Note
back to the default settings.
Express5800/T120h User's Guide
2. System Utility
185