System Utility; Overview; Starting Setup Utility - NEC Express5800/T120h User Manual

Chapter 3 Setup
2.

System Utility

2.1

Overview

System Utility is a utility to configure basic hardware settings. This utility is installed in the server as standard.
Factory settings of BIOS are set with optimal values. Usually, you do not need to run System Utility to change
the BIOS settings. Modify the settings only at the cases described in Chapter 3 (2.4 Cases that Require
Configuration).
System Utility includes the following features.
 Configuration of the system device and options installed
 Enabling and disabling system functions
Display of system information

Selection of Primary Boot Controller

 Configuration of Memory Option
Selection of language

Start of pre-boot environment such as built-in UEFI shell or EXPRESSBUILDER.

For details, see Chapter 2 (1. System Utilities) of Maintenance Guide.
2.2

Starting SETUP Utility

Run POST following Chapter 3 (1.1.1 POST sequence).
After a while, the following message is displayed on the screen. The on-screen message varies depending on
your system.
By pressing <F9> Key here, System Utility starts after POST is completed.
Furthermore, if an Admin Password has been set, a dialog box for password input will be displayed before
starting the system utility. Please enter the correct Admin Password.
You can enter password three times. If you enter wrong passwords three times in a row, further entry
of password is rejected.
To enter password again, restart the server.
182
Express5800/T120h User's Guide
2. System Utility