Chapter 2 Preparations
8.
Connect the M.2 SATA SSD installation kit to connectors of SATAPORT 4 and 5 on the motherboard with
the SATA cable.
Cable routes are as follows.
9.
Install the CPU duct and the Redundant fan kit.
10. See Chapter 2 (1.24 Installing Side Cover) to attach the side cover of the server.
11. See Chapter 2 (2 Installation and Connection) to conduct installation and connection, and turn the power
supply ON.
Removal
To remove a PCI card, reverse the installation procedure.
If using the server with the PCI card removed, attach the blank cover that comes with the PCI slot.
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Important
Re-attach the blank cover removed to maintain the internal cooling
Express5800/T120h User's Guide
1. Installing Internal Optional Devices
123