NEC Express5800/T120h User Manual page 92

Chapter 2 Preparations
(2)
3.5-inch HDD cage
(a)
Mounting on Box1
1. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. See (1) 2.5-inch HDD cage – (a) Mounting on Box 1 to remove blank cover and blank bay.
3. Mount the 3.5-inch HDD cage on the device and fix the four positions of cage with the screws attached to
the cage.
4. With the power cable attached to the 3.5-inch HDD cage, connect the 3.5-inch HDD cage's power
connector and the mother board's power connector for Box1 drive.
5. Connect the optional built-in SAS/SATA cable and the power cable.
For connecting SAS/SATA cable, see (d) Cable Route in this manual.
92
Power
connector
Power
connector for
Box1 drive
Express5800/T120h User's Guide
1. Installing Internal Optional Devices