NEC Express5800/T120h User Manual page 170

Chapter 2 Preparations
13. Connect peripheral devices to the server. For information on identifying the connector, see "Rear Panel
Components."
Close the cable latch to secure the cables to the cable management arm.
14. Check the operation of the rack rail and the cable management arm.
This operation requires two people. One person to slide the server tray, and another person to observe the
cable management arm.
a. Pull the server tray all the way out from the rack.
b. Make sure that the cable is long enough to expand the cable management arm fully without whipping
around or getting stuck.
c. Insert and pull out the server tray to make sure that the cable and the cable management arm is
operating correctly.
15. Press down on the blue tab to return the server tray on the rack.
170
Express5800/T120h User's Guide
1. Installing Internal Optional Devices