Model Number And Controller Type Selection Screen - Ametek L Series User Manual

L-Series and FCS-18- Graphical User Interface User Manual

5.1 Model Number and Controller type selection screen

The configuration model screen lists all available L-Series models and
controller types. In normal operation mode - (L-Series connected to PC) - this
screen is used for display purposes only. No changes can be made to the
active model number and controller type. When in simulation mode, changes
made to the selected model number and controller type will take effect when
the
To cancel any changes made, click on the
help on this screen, click on the
If changes are made while an L-Series unit is connected and the user
clicks on the
indicating that model changes can only be made in the simulation mode.
34
button is clicked.
button, the following error message will appear
California Instruments
button instead. For
button.
Rev D – March 2011