Restoring Configuration Data - Ametek L Series User Manual

L-Series and FCS-18- Graphical User Interface User Manual

11.2 Restoring configuration data

To restore configuration data in case of non volatile memory loss, select
the "Restore Configuration File..." entry from the "Options" menu. This will
bring up the following dialog box.
The number of configuration data files shown may be less depending on
the number of different L-Series power sources you own. There can be only
one configuration data file for each instrument. Select the correct serial
number.
WARNING: Restoring the wrong configuration file to a connected L-Series
unit may render it inoperative. If this is the case, try to restore the correct
configuration data file instead.
After restoring configuration data, cycle the power on the L-Series unit to
verify the new configuration data was accepted. In case you continue to
experience problems, contact California Instruments' Customer Satisfaction
department. (Refer to chapter 13).
86 California Instruments Rev D – March 2011