Ametek L Series User Manual page 95

Field
Record 5
field 1
field 2
field 3
field 4
field 5
Record 6
field 1
field 2
field 3
Record 7
field 1
field 2
field 3
Record 8
field 1
field 2
field 3
Record 9
field 1
field 2
field 3
field 4
field 5
field 6
Record 10
field 1
field 2
field 3
field 4
field 5
field 6
field 7
field 8
field 9
Note: Setup files are fixed format in that they always contain all records and
all fields, even if the data contained in them is irrelevant. For example, a
setup file for a 751L single phase system will still contain data for all three
phases. In this case, data for phase B and C is ignored and can not be
changed from within the LSGUI program.
Rev D – March 2011
L-Series and FCS-18 Graphical User Interface User Manual
Type Description
Steady state settings
decimal frequency
decimal voltage range
decimal phase mode
decimal output relay status
decimal current limit delay
Phase A steady state settings
decimal voltage
decimal current limit
decimal phase angle
Phase B steady state settings
decimal voltage
decimal current limit
decimal phase angle
Phase C steady state settings
decimal voltage
decimal current limit
decimal phase angle
Data logging settings
boolean data logging mode
decimal file mode
decimal time stamp format
decimal log interval time
string data logging file path and filename
string data log file user comment line
Measurement window settings
boolean enable/disable voltage measurement
boolean enable/disable current measurement
boolean enable/disable phase measurement
boolean enable/disable real power measurement
boolean enable/disable apparent power measurement
boolean enable/disable power factor measurement
boolean enable/disable phase A measurements
boolean enable/disable phase B measurements
boolean enable/disable phase C measurements
California Instruments 91