Software Version - Ametek L Series User Manual

L-Series and FCS-18- Graphical User Interface User Manual

1.3 Software version

From time to time, it may be necessary to release a new version of the
LSGUI software to fix bugs and or add new features and capabilities. This
will result in the decimal portion of the version number being increased. In
this case, it is unlikely that a new user manual would be required.
Addendum's and changes to this manual will be provided in the form of a
readme.txt file on the distribution disk. As such, you will not normally receive
an new manual when you receive a new software version. Major changes to
the functionality or operation of this software may require a new manual
version as well. In this case, the integer version number part will be
increased and a new manual version will be issued.
If the LSGUI software version you are using is 1.X with X from 0 to 9,
continue to use this manual. If the version number is 2.X or higher, contact
California Instruments to obtain an updated manual. Production and shipping
charges will apply.
10 California Instruments Rev D – March 2011