Main Program Window - Ametek L Series User Manual

L-Series and FCS-18- Graphical User Interface User Manual

4.3 Main program window

The LSGUI software is operated through a series of modal dialog boxes
or screens that are all accessed from the main menu bar. The main menu
bar is shown along the top edge of the main program window. Located
directly below the main menu bar is the toolbar or buttonbar. The toolbar
provides mouse click shortcuts for the most commonly accessed menus and
sub-menus. The toolbar can be made invisible from the options menu if
screen real estate is small or the user does not like using the mouse.
Below the menu and toolbar is the main program screen area. Here,
information on the L-Series power source that was detected on the IEEE-488
bus is displayed.
Figure 1 Main Program Window
20 California Instruments Rev D – March 2011