Transients - Ametek L Series User Manual

7. Transients

This chapter covers transient programming. Transients are an effective
way of generating common disturbances found on power lines. The L-Series
AC sources are equipped with sixteen non volatile transient memory
registers. The transient programming screen is used to specify transient
types and parameters for each register. Once downloaded, transients can be
executed starting from any of the sixteen registers.
The ability to link memory registers at random allows for complex
sequences and loops to be easily programmed.
Rev D – March 2011
L-Series and FCS-18 Graphical User Interface User Manual
California Instruments 47