Managing Multiple Transient Programs; Saving Transient Lists; Retrieving Transient List - Ametek L Series User Manual

7.6 Managing multiple transient programs

Multiple transient program lists can be saved to disk for later use. This
allows the user to create his or her own library of commonly used transient
programs.

7.6.1 Saving transient lists

When the
prompting the user to supply a transient program file name. Any eight
character name can be used. If an existing transient program file is selected,
its contents will be overwritten with the active data from the transient entry
screen. If a new name is entered, the transient data will be saved under the
new file name.

7.6.2 Retrieving transient list

When the
all available transient lists on disk. Use the mouse to select the desired file
and press on OK to load it. The new information will replace the present
contents of the data entry fields.
Rev D – March 2011
L-Series and FCS-18 Graphical User Interface User Manual
button is clicked, a file dialog box will appear
button is clicked, a file dialog box appears listing
California Instruments 63