Installed Files - Ametek L Series User Manual

3.3 Installed files

The installation program will install the following files in the directories
specified. Note that files with the same name that already exists in these
directories will be overwritten as part of the installation process. As long as
the files being overwritten are of an older date (previous version), this should
not cause any problems. If however you have newer versions of some of
these files, we recommend you back these files up prior to running the
installation program and then restore them afterwards.
Application directory files:
The following files are copied to the application directory. The application
directory name is chosen by the user at the time of installation. In this
manual, the default application directory name LSGUI is used.
path and filename
.\lsgui\lsgui.exe
.\lsgui\lsgui.hlp
.
Windows system directory files:
The following support files are copied to the windows system directory:
path and filename
.\windows\system\fpgrid10.vbx
.\windows\system\cmdialog.vbx
.\windows\system\spin.vbx
.\windows\system\threed.vbx
.\windows\system\mhtip.vbx
.\windows\system\mhrun400.ddl
.\windows\system\commdlg.ddl
.\windows\system\gpib.ddl
.\windows\system\ver.ddl
.\windows\system\setupkit.ddl
.\windows\system\vbrun300.ddl
Rev D – March 2011
L-Series and FCS-18 Graphical User Interface User Manual
California Instruments
size in bytes
216438 9/15/95
62601 9/13/95
size in bytes
409200 5/12/95
18688 4/28/93
22528 10/21/92
64432 7/17/93
35040 7/21/95
94352 7/21/95
89248 3/10/92
90624 8/31/94
9696 10/5/94
7008 4/28/93
398416 6/3093
date
date
13