Incompatible Ieee Card - Ametek L Series User Manual

Settings... menu. Use the drop down list located in the top right hand side of
this window to select a new IEEE address and click on the OK button.
If an initialization file exists (lsgui.ini), the IEEE address to use will be
obtained from the INI file. The INI file is written any time changes are made
to the program settings. This ensures that the LSGUI program always starts
in the same mode as in which it was terminated prior.

13.2.2 Incompatible IEEE card

The LSGUI program has been verified to work correctly with the following
two IEEE controller cards for the PC :
Manufacturer / Brand
National Instruments
National Instruments
Both cards are supplied with a driver called GPIB.DLL. This is the DLL
used by the LSGUI program. While it is possible that other cards are
compatible with either of these National Instruments cards, they are unlikely
to use the same function call conventions when calling the GPIB.DLL driver.
We recommend you obtain one of the two interface cards listed above to use
the LSGUI program. California Instruments has no plans to support other
interface cards with this program and can not assist you in troubleshooting
problems related to the use of incompatible cards.
Rev D – March 2011
L-Series and FCS-18 Graphical User Interface User Manual
Model Description
PC-IIA/PC-II 8 bit ISA card
PC-AT/TNT 16 bit ISA card
California Instruments 103