Erasing Transient Lists - Ametek L Series User Manual

L-Series and FCS-18- Graphical User Interface User Manual

7.6.3 Erasing transient lists

To erase the entire contents of the data entry area, the user has two
options. Either create a transient list file consisting of only Empty transient
types and save it on disk with a descriptive name such as "EMPTY.TLS".
Anytime the data present needs to be erased, load the EMPTY.LST file.
Alternatively, the
be used. When this button is clicked, the user will be asked for a confirmation
before all entries are erased.
Press No to abort the erase operation. If Yes is selected, all entries will be
erased. You may want to store the list information to disk before executing a
Clear All.
64
button, located in the bottom right corner can
California Instruments Rev D – March 2011