System Settings Screen - Ametek L Series User Manual

5.2 System Settings screen

The system settings screen is provided primarily for informational
purposes. None of the fields and options shown on this screen can be
changed by the user. This is because hardware configurations are based on
the actual L-Series unit found at the specified IEEE address.
The calibration password entry field can be used by qualified calibration
personnel to access the output calibration and measurement calibration
screens. When the correct password is entered here and the ENTER key is
pressed, the
Chapter 10 which covers Calibration for details on instrument calibration.
Rev D – March 2011
L-Series and FCS-18 Graphical User Interface User Manual
and the
California Instruments
buttons will be enabled. Refer to
35