7.2 Transient types
The LSGUI program supports several different transient types. Each
transient type and its parameters are described in more detail in this section.
The available transient types are :
no.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
The empty type is clearly not an actual transient but merely a place
holder. No transient data is downloaded to registers which have the transient
type field set to Empty.
Rev D – March 2011
L-Series and FCS-18 Graphical User Interface User Manual
Type
Empty
Voltage dropout
Voltage step
Voltage surge/sag
Voltage sweep
Frequency step
Frequency surge/sag
Frequency sweep
Voltage and Frequency sweep
Delay
California Instruments
Abbreviation
Empty
V Drop
V Step
V Srg/Sag
V Sweep
F Step
F Srg/Sag
F Sweep
VF Sweep
Delay
51