Applications Menu - Ametek L Series User Manual

4.4.6 Applications menu

The Applications menu may or may not appear when running the LSGUI
program. Its presence is determined by the availability of the MIL-STD-704
and RTCA/DO-160 application options in the connected L-Series AC source.
If neither option is detected, the Applications menu will not be shown at all. If
at least one of the two possible application is available, the Application menu
does become visible and one or two sub-menus will be shown. They are :
Submenu
MIL-STD-704...
RTCA/DO-160
Note : If the L-Series unit connected to the PC does not have either
option, this menu will not be available. If the reader is interested in one or
both of these options, switch to the simulation mode. In simulation mode, all
options can be simulated. This allows the reader to review the available
capabilities. L-Series units can be retrofitted with both application options.
Contact California Instruments or their local representative for details.
Rev D – March 2011
L-Series and FCS-18 Graphical User Interface User Manual
Purpose
When available, this sub-menu opens a dialog box which
enables the user to select all or a subset of MIL-STD-
704 test programs. Program execution can be started
from this sub-menu as well.
When available, this sub-menu opens a dialog box which
enables the user to select all or a subset of RTCA/DO-
160 test programs. Program execution can be started
from this sub-menu as well.
California Instruments 27