Enable Fips Mode - Cisco 7800 Series Administration Manual

Cisco IP Phone Administration
For more information about these settings, see the documentation for your particular Cisco Unified
Communications Manager release.
Procedure
Step 1
Obtain the CAPF authentication code that was set when the CAPF was configured.
Step 2
From the phone, press Applications
Step 3 Choose Admin Settings > Security Setup.
Note
Step 4
Choose LSC and press Select or Update.
The phone prompts for an authentication string.
Step 5 Enter the authentication code and press Submit.
The phone begins to install, update, or remove the LSC, depending on how the CAPF is configured. During
the procedure, a series of messages appears in the LSC option field in the Security Configuration menu, so
you can monitor progress. When the procedure is complete, Installed or Not Installed displays on the phone.
The LSC install, update, or removal process can take a long time to complete.
When the phone installation procedure is successful, the Installed message displays. If the phone displays
Not Installed, then the authorization string may be incorrect or the phone upgrade may not be enabled.
If the CAPF operation deletes the LSC, the phone displays Not Installed to indicate that the operation
succeeded. The CAPF server logs the error messages. See the CAPF server documentation to locate the logs
and to understand the meaning of the error messages.
Related Topics

Enable FIPS Mode

Procedure
Step 1 In Cisco Unified Communications Manager Administration, select Device > Phone and locate the phone.
Step 2 Navigate to the Product Specific Configuration area.
Step 3 Set the FIPS Mode field to Enabled.
Step 4
Select Apply Config.
Step 5 Select Save.
Step 6
Restart the phone.
You can control access to the Settings menu by using the Settings Access field in the Cisco Unified
Communications Manager Administration Phone Configuration window.
Cisco Unified Communications Manager
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
.
Documentation, on page xiii
Enable FIPS Mode
77