Cisco 7800 Series Administration Manual page 127

Cisco IP Phone Administration
Field Name Field Type
or Choices
Log Server String of up to 256
characters
Remote Log Disabled
Enabled
Log Profile Default
Preset
Telephony
SIP
UI
Network
Media
Upgrade
Accessory
Security
Wi-Fi
VPN
Energywise
MobileRemoteAc
IPv6 Log Server String of up to 256
characters
Outbound Rollover Disabled
Enabled
Cisco Discovery Disabled
Protocol (CDP):
Enabled
Switch Port
Default
Disabled
Preset
Disabled
Enabled
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Description and Usage Guidelines
Identifies the IPv4-only log server.
The format for the address is:
address:<port>@@base=<0-7>;pfs=<0-1>
Controls the ability to capture logs remotely.
Specifies the predefined logging profile.
• Default—Default debug logging level
• Preset—Does not overwrite the phone local debug logging
setting
• Telephony—Logs information about Telephony or call
features
• SIP—Logs information about SIP signaling
• UI—Logs information about the phone user interface
• Network—Logs network information
• Media—Logs media information
• Upgrade—Logs upgrade information
• Accessory—Logs accessory information
• Security—Logs security information
• Wi-Fi—Logs Wi-Fi information
• VPN—Logs virtual private network information
• Energywise—Logs energy-savings information
• MobileRemoteAC—Logs Mobile and Remote Access
through Expressway information
Identifies the IPv6-only log server.
The format for the address is:
[address]:<port>@@base=<0-7>;pfs=<0-1>
Allows users to make a call when the number of calls for a line
exceeds the maximum number of calls (MNC).
The Cisco IP Phone 7811 does not support this field.
Controls Cisco Discovery Protocol on the SW port of the
phone.
Product Specific Configuration
113