Cisco 7800 Series Administration Manual page 113

Cisco IP Phone Administration
Feature
Outbound Roll Over
Pause in Speed Dial
Peer Firmware Sharing
Phone Display Message for
Extension Mobility Users
PLK Support for Queue Statistics
Plus Dialing
Privacy
Description and More Information
Allows users to make a call when the number of calls for a line exceeds the maximum number
of calls (MNC).
This feature is configured on Cisco Unified Communication Manager by navigating Device
> Phone. It is disabled by default.
The Cisco IP Phone 7811 does not support this feature.
Note
Users can set up the speed-dial feature to reach destinations that require Forced Authorization
Code (FAC) or Client Matter Code (CMC), dialing pauses, and additional digits (such as a
user extension, a meeting access code, or a voicemail password) without manual intervention.
When the user presses the speed dial, the phone establishes the call to the specified DN and
sends the specified FAC, CMC, and DTMF digits to the destination and inserts the necessary
dialing pauses.
Provides the following advantages in high-speed campus LAN settings:
• Limits congestion on TFTP transfers to centralized remote TFTP servers
• Eliminates the need to manually control firmware upgrades
• Reduces phone downtime during upgrades when large numbers of devices are reset
simultaneously
Peer Firmware Sharing may also aid in firmware upgrades in branch/remote office deployment
scenarios that run over bandwidth-limited WAN links.
See Peer Firmware Sharing,
This feature enhances the phone interface for the Extension Mobility user by providing friendly
messages.
The PLK Support for Queue Statistics feature enables the users to query the call queue statistics
for hunt pilots and the information appears on phone screen.
Note The Cisco IP Phone 7811 does not support this feature.
See Set Up Softkey Template, on page
Allows the user to dial E.164 numbers prefixed with a plus (+) sign.
To dial the + sign, the user needs to press and hold the star (*) key for at least 1 second. This
applies to dialing the first digit for an on-hook (including edit mode) or off-hook call.
Prevents users who share a line from adding themselves to a call and from viewing information
on their phone display about the call of the other user.
The Cisco IP Phone 7811 does not support privacy.
Note
See barge information in the documentation for your particular Cisco Unified Communications
Manager release.
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Telephony Features for the Cisco IP Phone
Product Specific Configuration, on page 106
142.
.
99