Cisco 7800 Series Administration Manual page 122

Product Specific Configuration
Field Name Field Type
or Choices
Enbloc Dialing Disabled
Enabled
Days Backlight Not Days of the week
Active
Backlight On Time hh:mm
Backlight On hh:mm
Duration
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
108
Default Description and Usage Guidelines
Disabled Controls the dialing method.
• Disabled—The Cisco Unified Communications Manager
waits for the interdigit timer to expire when there is a dial
plan or route pattern overlap.
• Enabled—The entire dialed string is sent to Cisco Unified
Communications Manager once the dialing is complete.
To avoid the T.302 timer timeout, we recommend that
you enable Enbloc Dialing whenever there is a dialplan
or route pattern overlap.
Forced Authorization Codes (FAC) or Client Matter Codes
(CMC) do not support the Enbloc Dialing. If you use FAC or
CMC to manage call access and accounting, then you cannot
use this feature.
Defines the days that the backlight does not turn on
automatically at the time specified in the Backlight On Time
field.
Choose the day or days from the drop-down list. To choose
more than one day, Ctrl+click each day that you want.
Defines the time each day that the backlight turns on
automatically (except on the days specified in the Backlight
Display Not Active field).
Enter the time in this field in 24 hour format, where 0:00 is
midnight.
For example, to automatically turn the backlight on at 07:00
a.m. (0700), enter 07:00. To turn the backlight on at 02:00 p.m.
(1400), enter 14:00.
If this field is blank, the backlight automatically turns on at
0:00.
Defines the length of time that the backlight remains on after
turning on at the time specified in the Backlight On Time field.
For example, to keep the backlight on for 4 hours and 30
minutes after it turns on automatically, enter 04:30.
If this field is blank, the phone turns off at the end of the day
(0:00).
If Backlight On Time is 0:00 and the backlight on duration is
blank (or 24:00), the backlight does not turn off.
Cisco IP Phone Administration