Cisco 7800 Series Administration Manual page 79

Cisco IP Phone Installation
Feature
Hold
Resume
Conference
Conference List
Transfer
Transfer to Active Calls (Direct
Transfer)
Auto Answer
Call Waiting
Caller ID
Unified Session Presentation
Voicemail
Call Forward All
Speed Dial
To Voicemail (iDivert)
Line Filters
Park Monitoring
Enhanced Message Waiting
Indication
Directed Call Park
Supported
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Partial
No
No
No
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Surviveable Remote Site Telephony
Notes
3 way only and local mixing only.
Consult only.
Conference is the only feature supported due
to other feature limitations.
Voicemail will not be synchronized with other
users in the Cisco Unified Communications
Manager cluster.
Forward state is only available on the phone
that sets the forward because there are no
shared line appearances in SRST mode. The
Call Forward All settings are not preserved
on failover to SRST from the Cisco Unified
Communications Manager, or from SRST
fail-back to the Communications Manager.
Any original Call Forward All still active on
the Communications Manager should be
indicated when the device reconnects to the
Communications Manager after failover.
The iDivert softkey does not display.
Lines are supported but cannot be shared.
The Park softkey does not display.
Message count badges do not appear on the
phone screen.
Only the Message Waiting icon displays.
The softkey does not display.
65