Cisco 7800 Series Administration Manual page 57

Cisco IP Phone Installation
Entry
PC Port Setup
UDP-MED
Type
Auto Negotiate
1000 Full
100 Half
10 Half
10 Full
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Default
Auto Negotiate
Network Setup
Description
Speed and duplex of the
Computer (access) port. Valid
values:
• Auto Negotiate
• 1000 Full: 1000-BaseT/full
duplex
• 100 Half: 100-BaseT/half
duplex
• 100 Full: 100-BaseT/full
duplex
• 10 Half: 10-BaseT/half
duplex
• 10 Full: 10-BaseT/full
duplex
If the phone is connected to a
switch, configure the port on the
switch to the same speed as the
phone, or configure both to
autonegotiate.
Unlock network configuration
options if you want to change
this field. If you change the
setting, you must change the SW
Port Configuration option to the
same setting.
To configure the setting on
multiple phones simultaneously,
enable Remote Port
Configuration in the Enterprise
Phone Configuration window
(System > Enterprise Phone
Configuration).
If the ports are configured for
Remote Port Configuration in
Cisco Unified Communications
Manager Administration, the
data cannot be changed on the
phone.
43